Limit value switch with Ex i input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, screw connection.
Configurable limit value switch with intrinsically safe input [Ex ia]
Input [Ex ia] for active current signals (0.2...20 mA) or active voltage signals (0.1...10 V)
Relay output with PDT
Configuration without software via DIP switches and potentiometer
Safe 3-way electrical isolation
Power supply possible via DIN rail connector
Plug-in connection terminal blocks, with either screw or push-in connection technology
Housing width of 12.5 mm
| 属性 | 数值 |
|---|---|
| 模块类型 | 限值开关 |
| 输入信号类型 | 电流,电压 |
| 输出信号类型 | 继电器 |
| 电源电压 | 24V 直流 |
| 输入范围 | 0.1 → 10 V, 0.18 → 21mA |
| 输出范围 | <lteq/>(ac) 4A, <lteq/>0.2 A @ 24 V dc |
| 危险区认证 | ATEX |
| 安装类型 | DIN 卡轨安装 |
| 工作温度范围 | -20 → +65°C |