PAX 工业指示灯，电流、电压、温度、电阻
可用作高柔性和精确实验室仪器
坚固的塑料外壳还设计用于恶劣的工业用途
可通过 PC 或直接使用 5 按钮进行快速并安全地投射
可使用插入选项进行改进
PAX D，用于标准/模拟信号
PAX T，用于热电偶和 PT100
Red Lion PAX® Extension Analog Card
The Red Lion PAXCDL10 series plug-in card is an analogue output card used with EPAX display. The PAX meter can be fitted with up to three option cards such as serial communications, analogue output, and setpoint output. However, only one card from each function category can be installed at a time. The linear DC output plug-in card provides either 20mA or 10V signals. The plug-in setpoint cards provide dual FORM-C relays (5A), quad FORM-A relays (3A), quad sinking, or quad sourcing open collector logic outputs.
Features and Benefits
Terminal block and quick disconnect connector
Resolution is 1/3500
Response time is 10ms
RS232, RS485, Modbus, DeviceNet and Profibus-DP communication interfaces
Readout values and setpoint alarm values can be controlled through the bus
Applications
Use with PAX units
Certifications
cULus approved
CSA Certified
CE certified
| 属性 | 数值 |
|---|---|
| 附件类型 | 插入式卡 |
| 使用于 | EPAX 显示屏 |